This chapter covers a bunch of useful things to know when writing PyBlosxom plugins. This chapter, moreso than the rest of this manual, is very much a work in progress.
If you need help with plugin development, sign up on the devel mailing list and/or join us on #pyblosxom on irc.freenode.net. More details in Project details, contact information, and where to go for help.
FIXME - this needs more work
This section covers things that all plugins should have. This makes plugins easier to distribute, maintain, update, and easier for users to use them.
All plugins need a good name that’s unique so that your plugin doesn’t get confused with other plugins. Additionally, the filename for your plugin needs to be unique.
Warning
Make sure the filename for your plugin is unique! PyBlosxom imports your plugin using Python import machinery which means that if your plugin has the same name as a package on your system, then depending on how sys.path is set up, PyBlosxom may load the package on your system and NOT your plugin.
If you think this might be happening to you, do pyblosxom-cmd test and it’ll tell you the paths of what it’s loading.
All plugins should have a docstring at the top of the file that describes in detail:
For example, this is at the top of Will’s wbgpager plugin:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 | """
Quickly written plugin for paging long index pages.
PyBlosxom uses the num_entries configuration variable to prevent
more than num_entries being rendered by cutting the list down
to num_entries entries. So if your num_entries is set to 20, you
will only see the first 20 entries rendered.
The wbgpager overrides this functionality and allows for paging.
It does some dirty stuff so that PyBlosxom doesn't cut the list down
and then wbgpager cuts it down in the prepare callback later down
the line.
To install wbgpager, do the following:
1. add "wbgpager" to your load_plugins list variable in your
config.py file---make sure it's the first thing listed so
that it has a chance to operate on the entry list before
other plugins.
2. add the $page_navigation variable to your head or foot
(or both) templates. this is where the page navigation
HTML will appear.
Here are some additional configuration variables to adjust the
behavior:
wbgpager_count_from
datatype: int
default value: 0
description: Some folks like their paging to start at 1---this
enables you to do that.
wbgpager_previous_text
datatype: string
default value: <<
description: Allows you to change the text for the prev link.
wbgpager_next_text
datatype: string
default value: >>
description: Allows you to change the text for the next link.
wbgpager_linkstyle
datatype: integer
default value: 0
description: This allows you to change the link style of the paging.
style 0: [1] 2 3 4 5 6 7 8 9 ... >>
style 1: Page 1 of 4 >>
That should be it!
Note: This plugin doesn't work particularly well with static rendering.
The problem is that it relies on the querystring to figure out which
page to show and when you're static rendering, only the first page
is rendered. This will require a lot of thought to fix. If you are
someone who is passionate about fixing this issue, let me know.
Permission is hereby granted, free of charge, to any person
obtaining a copy of this software and associated documentation
files (the "Software"), to deal in the Software without restriction,
including without limitation the rights to use, copy, modify,
merge, publish, distribute, sublicense, and/or sell copies of the
Software, and to permit persons to whom the Software is furnished
to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be
included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.
Copyright 2004, 2005, 2006 Will Kahn-Greene
"""
|
All plugins should have the following module-level variables defined in them just after the docstring:
For example:
__author__ = "Will Kahn-Greene - willg at bluesock dot org"
__version__ = "version 1.5 2006-01-15"
__url__ = "http://www.bluesock.org/~willg/pyblosxom/"
__description__ = "Splits long indexes into multiple pages."
After that, you should have a verify_installation section that verifies that the plugin is configured correctly. As of PyBlosxom 0.9, PyBlosxom allows users to test their configuration and installation from the console.
You can test using either the pyblosxom.cgi script or the pyblosxom-cmd script:
% ./pyblosxom.cgi test
or:
$ ./pyblcmd_dev.sh test --config ./newblog/
pyblosxom-cmd version 1.5 dev
Adding ./newblog/ to sys.path....
Trying to import the config module....
System Information
==================
- pyblosxom: 1.5 dev
- sys.version: 2.6.4 (r264:75706, Dec 7 2009, 18:45:15) [GCC 4.4.1]
- os.name: posix
- codebase: /home/willg/projects/pyblosxom/trunk/pyblosxom
Checking config.py file
=======================
- properties set: 21
- datadir '/home/willg/projects/pyblosxom/testing/newblog/entries' exists.
Checking plugin configuration
=============================
....
This goes through and verifies the properties in the config.py file as best as it can. It also prints out diagnostic information which is useful when things don’t work. It also loads and initializes all the plugins and asks them to verify their configurations as best they can.
As a plugin developer, you should add a verify_installation function to your plugin module. Something like this (taken from pycategories):
1 2 3 4 5 6 7 8 9 | def verify_installation(request):
config = request.get_configuration()
if not config.has_key("category_flavour"):
print "missing optional config property 'category_flavour' "
print "which allows you to specify the flavour for the category "
print "link. refer to pycategory plugin documentation for more "
print "details."
return 1
|
This gives you (the plugin developer) the opportunity to walk the user through configuring your highly complex, quantum-charged, turbo plugin in small baby steps without having to hunt for where their logs might be.
So check the things you need to check, print out error messages (informative ones) using print, and then return a 1 if the plugin is configured correctly or a 0 if it’s not configured correctly.
Note
This is not a substitute for the user to read the installation instructions. It should be a really easy way to catch a lot of potential problems without involving the web server’s error logs and debugging information being sent to a web-browser and things of that nature.
Here’s an example of verify_installation from Will’s wbgpager plugin:
1 2 3 4 5 6 7 8 9 10 11 | def verify_installation(request):
config = request.get_configuration()
if config.get("num_entries", 0) == 0:
print "missing config property 'num_entries'. wbgpager won't do "
print "anything without num_entries set. either set num_entries "
print "to a positive integer, or disable the wbgpager plugin."
print "see the documentation at the top of the wbgpager plugin "
print "code file for more details."
return 0
return 1
|
First you need to get the logger instance. After that, you can call debug, info, warning, error and critical on the logger instance. For example:
1 2 3 4 5 6 7 8 9 10 11 12 | from pyblosxom import tools
def cb_prepare(args):
# ...
logger = tools.get_logger()
logger.info("blah blah blah...")
try:
pass
# ...
except ValueError, e:
logger.error(e)
|
The easiest way to store state between callbacks is to store the data in the data dict of the Request object. For example:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 | STATE_KEY = "myplugin_state"
def cb_date_head(args):
request = args["request"]
data = request.get_data()
if ((data.has_key(STATE_KEY)
and data[STATE_KEY]["blah"] == "blahblah")):
pass
# ...
def cb_filelist(args):
request = args["request"]
data = request.get_data()
data[STATE_KEY] = {}
data[STATE_KEY]["blah"] = "blahblah"
|
If you want to implement a callback, you add a function corresponding to the callback name to your plugin module. For example, if you wanted to modify the Request object just before rendering, you’d implement cb_prepare like this:
def cb_prepare(args):
pass
Obviously, since we have pass we’re not actually doing anything here, but when the user sends a request and PyBlosxom handles it, this function in your plugin will get called when PyBlosxom runs the prepare callback.
Each callback passes in arguments through a single dictionary. Each callback passes in different arguments and expects different return values. Check the doc:dev_architecture <architecture> chapter for a list of all the callbacks that are available, their arguments, and return values.
Entry parsing functions take in a filename and the Request object. They then open the file and parse it out. They can call cb_preformat and cb_postformat as they see fit. They should return a dict containing at least "title" and "body" keys. The “title” should be a single string. The "body" should be a single string and should be formatted in HTML.
Here’s an example code that reads .plain files which have the title as the first line, metadata lines that start with # and then after all the metadata the body of the entry:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 | import os
def cb_entryparser(entryparsingdict):
"""
Register self as plain file handler
"""
entryparsingdict["plain"] = parse
return entryparsingdict
def parse(filename, request):
"""
We just read everything off the file here, using the filename
as the title.
"""
entrydata = {}
f = open(filename, "r")
lines = f.readlines()
f.close()
entrydata["title"] = filename
entrydata["body"] = "<pre>" + "".join(lines) + "</pre>"
return entrydata
|
You can also specify the template to use by setting the "template_name" variable in the returned dict. If the template specified doesn’t exist, PyBlosxom will use the story template for the specified flavour.
For example, if you were creating a tumblelog and the file parsed was a image entry and you want image entries to be displayed on your blog with an image and then a caption below it and that’s it, then you would create a template for that and set "template_name" to the name of the template:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 | def cb_entryparser(entryparsingdict):
"""
Register self as plain file handler
"""
entryparsingdict['image'] = parse_image
return entryparsingdict
def parse_image(filename, request):
"""
An image entry consists of an image file name followed by
the caption. Like this::
cimg_8229.jpg
This is a picture of me standing on my head.
Note that there's no title, no metadata, ...
"""
entrydata = {}
f = open(filename, "r")
lines = f.readlines()
f.close()
# we do this for RSS purposes
entrydata['title'] = "image %s" % lines[0]
entrydata['body'] = "\n".join([
"<img src=\"/images/%s\">",
"<p>%s</p>" % "".join(lines[1:])
])
entrydata["template_name"] = "image_post"
return entrydata
|
FIXME - need more about preformatters here
A typical preformatter plugin looks like this:
1 2 3 4 5 6 7 8 9 | def cb_preformat(args):
if args['parser'] == 'linebreaks':
return parse(''.join(args['story']))
def parse(text):
# A preformatter to convert linebreak to its HTML counterpart
text = re.sub('\\n\\n+','</p><p>',text)
text = re.sub('\\n','<br />',text)
return '<p>%s</p>' % text
|
FIXME - write this section
FIXME - write this section
New in PyBlosxom 1.5
The pyblosxom-cmd command allows for plugin-defined commands. This allows your plugin to do maintenance tasks (updating an index, statistics, generating content, ...) and allows the user to schedule command execution through cron or some similar system.
To write a new command, you must:
For example, this adds a command to print command line arguments:
1 2 3 4 5 6 7 | def printargs(command, argv):
print argv
return 0
def cb_commandline(args):
args["printargs"] = (printargs, "prints arguments")
return args
|
Note
The plugin must be in a directory specified by load_plugins in the user’s config.py file.
Executing the command looks like this:
% pyblosxom-cmd printargs --config /path/to/config.py/dir a b c
pyblosxom-cmd version 1.5
a b c